rf-wm-3200b3 module has two operation modes: at commands mode and serial port data transparent transmission mode.the module can be configured through serial port at command under at command mode (for specific operation command please refers to "at command" section). through a simple at command configuration, data can be transparently transmitted to the specified network devices through serial ports.

  • transmit power: 17dbm
  • support agreement: ieee 802.11 b/g/n
  • communication distance: 100m
  • core programme: cc3200
  • core strengths: compatible with ti cc3200mod,low power consumption
product description

 

low power consumption cc3200 3.3v external antenna uart with usb interface wifi soc module

 

rf-wm-3200b3 module is the latest embedded wi-fi module presented by rf-star. this module adopts the latest simplelink wi-fi cc3200 chip design by texas intruments, built-in with high performance arm cortex-m4 mcu, and containing a variety of peripherals, such as parallel camera interface, i2s, sd/mmc, uart, spi, i2c, adc and gpio. this module supports 802.11 b/g/n wireless standards, and can work in station, ap and wi-fi direct connection modes. in addition, the hardware of module also offer 3 options of antenna making, including the ceramic antenna, ipex base, and the antenna welding.

rf-wm-3200b3 module has two operation modes: at commands mode and serial port data transparent transmission mode.the module can be configured through serial port at command under at command mode (for specific operation command please refers to "at command" section). through a simple at command configuration, data can be transparently transmitted to the specified network devices through serial ports

 

 

 

chip:cc3200

high performance arm cortex-m4 mcu

802.11 b/g/n wireless standards

work in station, ap or wi-fi direct connection modes

at commands mode and serial port data transparent transmission mode

tcp/ip protocols and applications

3 kinds of antennas

 

• cc3200 simplelink wi-fi—consists of programming interfaces (apis)

applications microcontroller, wi-fi network • 8 simultaneous tcp or udp sockets

processor, and power-management subsystems

– arm® cortex®-m4 core at 80 mhz 

– embedded memory

• ram (up to 256kb)

• external serial flash bootloader, and peripheral drivers in rom

– 32-channel direct memory access (μdma)

– hardware crypto engine for advanced fast 

security, including

 

• aes, des, and 3des

• sha2 and md5

• crc and checksum

– 8-bit parallel camera interface

– 1 multichannel audio serial port (mcasp)

• dedicated external spi interface for serial flash

interface with support for two i2s channels

• wi-fi network processor subsystem

• industry-standard bsd socket application

 

 

pin no.

mod pin name

type

ic pin no.

description

1

gnd

-

 

ground

2

gnd

-

 

ground

3

gpio10

i/o

1

gpio

4

gpio11

i/o

2

gpio

5

gpio14

i/o

5

gpio

6

gpio15

i/o

6

gpio

7

gpio16

i/o

7

gpio

8

gpio17

i/o

8

gpio

9

gpio12

i/o

3

gpio

10

gpio13

i/o

4

gpio

11

gpio22

i/o

15

gpio

12

jtag_tdi/p23

i/o

16

gpio

13

nc

-

13

reserved

14

nc

-

14

reserved

15

nc

-

11

reserved

16

gnd

-

 

ground

17

nc

-

12

reserved

18

jtag_tdo/p24

i/o

17

gpio

19

gpio28

i/o

18

gpio

20

nc

-

23

unused

21

jtag_tck/p19

i/o

19

jtag tck input

22

jtag_tms/p29

i/o

20

jtag tms input

23

sop2/p25

i/o

21

add pull-down resistor to ground needed for functional mode. add option to pull-up required for entering the uart load mode for flashing.

24

sop1

-

34

reserved. do not connect.

25

antsel1/p26

i/o

29

antenna selection control.

26

antsel2/p27

i/o

30

antenna selection control.

27

gnd

-

 

ground

28

gnd

-

 

ground

29

nc

-

27,28

reserved

30

gnd

-

 

ground

31

rf_out1

i/o

31

2.4ghz rf input/output.

32

gnd

-

 

ground

33

nc

-

38

reserved

34

sop0

-

35

optional 1-kω pull-up if user chooses to use swd debug mode instead of 4-wire jtag.

35

reset

i

32

power on reset. does not require external rc circuit.

36

vcc

-

37

power supply for the device, can be connected to battery(2.7v to 3.6v).

37

vcc

-

39

power supply for the device, can be connected to battery(2.7v to 3.6v).

38

gnd

-

 

ground

39

nc

-

47

not connected

40

vcc

-

10,44,54

power supply for the device, can be connected to battery(2.7v to 3.6v).

41

nc

-

25,36,48

reserved

42

gpio30

i/o

53

gpio

43

gnd

-

 

ground

44

gpio0

i/o

50

gpio

45

nc

-

51

reserved

46

gpio1

i/o

55

gpio

47

gpio2

i/o

57

gpio

48

gpio3

i/o

58

gpio

49

gpio4

i/o

59

gpio

50

gpio5

i/o

60

gpio

51

gpio6

i/o

61

gpio

52

gpio7

i/o

62

gpio

53

gpio8

i/o

63

gpio

54

gpio9

i/o

64

gpio

55

gnd

-

 

thermal ground

56

gnd

-

 

thermal ground

57

gnd

-

 

thermal ground

58

gnd

-

 

thermal ground

59

gnd

-

 

thermal ground

60

gnd

-

 

thermal ground

61

gnd

-

 

thermal ground

62

gnd

-

 

thermal ground

63

gnd

-

 

thermal ground

 

wi-fi application

– cloud connectivity – internet gateway

– home automation – industrial control

– home appliances – smart plug and metering

– access control – wireless audio

– security systems – ip network sensor nodes

– smart energy

our company

 

 

                                  

 

      

founded in 2010, rf star is a world leading iot communication & sensing solution provider. it offers modules and turn-key solutions over ble, wifi, zigbee, sub 1ghz, nb-iot, lora and rfid etc., for a wide variety of consumer, industrial and military scenarios. the flexibility capacity is about 100k per week.

 

rfstar engineers are proud of the innovation culture and down-to-earth professional spirit. we built our products on top of solid vertical integration of agile r&d and lean manufacturing. all the products shall be shipped from rfstar only after their quality is justified by exhaustive validations and relevant regulations are compliant. our endeavor was well accredited by industrial leaders such as texas instrument, nordic, broadcom, huawei and realtek etc.

 

 

our advantages

 

14 years experience in rf fields

strong r&d department

technology support

oem and odm acceptable:

   1. schematic design;

   2. mold design;

   3. pcb layout;

   4. firmware design;

   5. shell and package;

   6. production and assembling.

 

 

packaging & shipping

 

faq

 

contact us

                                      

recommended footprint

图片关键词


pin attributes

图片关键词




 

 

pin no.

mod pin name

type

ic pin no.

description

1

gnd

-


ground

2

gnd

-


ground

3

gpio10

i/o

1

gpio

4

gpio11

i/o

2

gpio

5

gpio14

i/o

5

gpio

6

gpio15

i/o

6

gpio

7

gpio16

i/o

7

gpio

8

gpio17

i/o

8

gpio

9

gpio12

i/o

3

gpio

10

gpio13

i/o

4

gpio

11

gpio22

i/o

15

gpio

12

jtag_tdi/p23

i/o

16

gpio

13

nc

-

13

reserved

14

nc

-

14

reserved

15

nc

-

11

reserved

16

gnd

-


ground

17

nc

-

12

reserved

18

jtag_tdo/p24

i/o

17

gpio

19

gpio28

i/o

18

gpio

20

nc

-

23

unused

21

jtag_tck/p19

i/o

19

jtag tck input

22

jtag_tms/p29

i/o

20

jtag tms input

23

sop2/p25

i/o

21

add pull-down resistor to ground needed for functional mode. add option to pull-up required for entering the uart load mode for flashing.

24

sop1

-

34

reserved. do not connect.

25

antsel1/p26

i/o

29

antenna selection control.

26

antsel2/p27

i/o

30

antenna selection control.

27

gnd

-


ground

28

gnd

-


ground

29

nc

-

27,28

reserved

30

gnd

-


ground

31

rf_out1

i/o

31

2.4ghz rf input/output.

32

gnd

-


ground

33

nc

-

38

reserved

34

sop0

-

35

optional 1-kω pull-up if user chooses to use swd debug mode instead of 4-wire jtag.

35

reset

i

32

power on reset. does not require external rc circuit.

36

vcc

-

37

power supply for the device, can be connected to battery(2.7v to 3.6v).

37

vcc

-

39

power supply for the device, can be connected to battery(2.7v to 3.6v).

38

gnd

-


ground

39

nc

-

47

not connected

40

vcc

-

10,44,54

power supply for the device, can be connected to battery(2.7v to 3.6v).

41

nc

-

25,36,48

reserved

42

gpio30

i/o

53

gpio

43

gnd

-


ground

44

gpio0

i/o

50

gpio

45

nc

-

51

reserved

46

gpio1

i/o

55

gpio

47

gpio2

i/o

57

gpio

48

gpio3

i/o

58

gpio

49

gpio4

i/o

59

gpio

50

gpio5

i/o

60

gpio

51

gpio6

i/o

61

gpio

52

gpio7

i/o

62

gpio

53

gpio8

i/o

63

gpio

54

gpio9

i/o

64

gpio

55

gnd

-


thermal ground

56

gnd

-


thermal ground

57

gnd

-


thermal ground

58

gnd

-


thermal ground

59

gnd

-


thermal ground

60

gnd

-


thermal ground

61

gnd

-


thermal ground

62

gnd

-


thermal ground

63

gnd

-


thermal ground


label: cc3200 wi-fi 2.4g