rf-zm-sl01 module is a zigbee 3.0 module developed based on efr32 chip of silicon labs company. it can be widely used in the field of short-distance wireless communication networking, with low power consumption, small size, strong anti-interference ability, etc.

  • transmit power: 19.5dbm
  • support agreement: zigbee3.0
  • communication distance: 1000m
  • core programme: efr32
  • core strengths: ultra-long distance,all i/o

rf-star rf-zm-sl01  long range long distance efr32mg zigbee module 2.4ghz

 

rf-am-sl01 module is based on efr32mg1b232f256gm32-c0 of silicon labs. the efr32mg1b232f256gm32-c0 is a true system-on-chip (soc) solution for zigbee, thread and multiprotocol, and it supports the following modulation formats: 2/4 (g)fsk with fully configurable shaping, bpsk/dbpsk tx, ook/ask, shaped oqpsk/(g)msk, configurable dsss and fec. the module enables industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier and no-compromise mcu. it integrates 32-bit arm ò cortex ò-m4 core with 40mhz maximum operating frequency, pa with up to 19 dbm and balun.

 

table 1.  pin definition of rf-zm-sl01

 

pin no.

pin name

function

remarks

pin1

gnd

gnd

grounding

pin2

vcc

sys_power

power supply,( 2.3v to 3.6 v)3. 3v will be recommended

pin3

pd13

gpio


pin4

pd14

gpio


pin5

pd15

gpio


pin6

pa0

gpio


pin7

pa1

gpio


pin8

pb11

gpio


pin9

pb12

gpio


pin10

pb13

gpio


pin11

pb14

gpio


pin12

iovdd

i/o_power


pin13

vdddc

internal dcdc

internal dcdc out 1.8v

pin14

pb15

gpio


pin15

pf2

gpio


pin16

pf3

gpio


pin17

pc10

gpio

connect the j-link simulaor swdio

pin18

pc11

gpio

grounding

pin19

swc

swclk

connect the j-link simulator swclk

pin20

swd

swdio

connect the j-link simulator swd

pin21

res

reset

active when set low level

pin22

gnd

gnd


pin23

ext_ant

external antenna

connect the external antenna

pin24

gnd

gnd


our services

 

zigbee application

 

our company

 

packaging & shipping

 

faq

 

contact us

 


recommended footprint

图片关键词


pin attributes

图片关键词

pinnamefunctionremarks
pin1gndgndgrounding
pin2vccsys_powerpower supply,( 1.8v to 3.8 v)3. 3v will be recommended
pin3pd13gpio-
pin4pd14gpio-
pin5pd15gpio-
pin6pa0gpio-
pin7pa1gpio-
pin8pb11gpio-
pin9pb12gpio-
pin10pb13gpio-
pin11pb14gpio-
pin12iovddi/o_power-
pin13vdddcinternal dcdcinternal dcdc out 1.8v
pin14pb15gpio-
pin15pf2gpio-
pin16pf3gpio-
pin17pc10gpioconnect the j-link simulaor swdio
pin18pc11gpiogrounding
pin19swcswclkconnect the j-link simulator swclk
pin20swdswdioconnect the j-link simulator swd
pin21resresetactive when set low level
pin22gndgnd-
pin23ext_antexternal antennaconnect the external antenna
pin24gndgnd-